FRETWORK NEWS and The Newsletter
Posted at 10:27h
in
Uncategorized
by PJW
DATE
SET
COVER
FILLING
IGN SOURCE
RESULT
PICS
COMMENT
23/03
1
TREVIRA STD TEST PES
VP45 with wool/cotton fleece below cover
0
BH
less tip
PASS
Set 1
A - G
VERY FULL RIG
23/03
1
BROWN COTTON TWILL 335 gsm NON FR
VP45 with wool/cotton fleece below cover
0
BH
less tip
PASS
Set 1
A - G
VERY FULL RIG
26/03
2
TREVIRA STD TEST PES
CM 26/130 kg FOAM
0
BH
less tip
PASS?
SET 2
A - H
CIGS BURNT AT...
Posted at 10:18h
in
Uncategorized
by PJW
FRETWORK SMOULDER TRIALS - 4
So, now we return to the issue of so-called chemical free and natural fibre fillings.
We saw the problem in incorporating a fibre fill into the L shaped rig.
We had some specially prepared foam fillings in CM 26 kg foam cut down...
Posted at 08:40h
in
Uncategorized
by PJW
FRETWORK SMOULDER TRIALS - 3
This time, whilst still searching for a real result, we resorted to a Non CM 23 kgs foam and started with some lightweight cottons with a more common (cheap) construction. We sourced a 150 gsm calico and a 220 gsm cotton...
Posted at 14:51h
in
Uncategorized
by PJW
FRETWORK SMOULDER TRIALS
Our second set of tests were made using a low grade of CM foam but leaving out any evaluation of fibre fill in the rig. We used the same Benson and Hedges with tips cut off as used in the first trials (set...
Posted at 11:49h
in
Uncategorized
by PJW
FRETWORK SMOULDER TRIALS
This is the first set of tests completed. It must be stressed that these are not tests that would normally be carried out. Composite tests like these are used to grade Outer Cover or Filling or a specific combination but adding a fleece...
Posted at 11:47h
in
Uncategorized
by PJW
We have made (part of ) this booklet from 40 years ago available to download.
An explanation of how and why it is there has been added as an introduction.
We believe a may offer an insight into how much and how little
things have changed since the...
Posted at 11:32h
in
Uncategorized
by PJW
Here are the stills from the burn and you may judge which is which after you have watched the videos:
One aspect of promoting PROCESS CONTROL in the the FRETWORK Code of Good Practice is the contentious issue of treating finished upholstery to provide soiling or stain...
Posted at 06:52h
in
newsletter
by PJW
We received this yesterday:
Not very remarkable but lets take a closer look:
The damage to the seat cushion was caused (apparently) by a self igniting smart phone.
The cushion has been returned for a replacement to be made. Another quiet day at the office then?
But if you...